CALCET  Company


Publications and Presentations


  1. Nestor, C. and N. Moisidis, "Prüfstandproben Anstatt Langdauernder Betriebsproben Für Die Freigabe eines Neuen Motorenöls Für Dieselmotoren", Presented at the Internal Combustion Engine Conference, Bucharest, Romania, 1967, paper II-6, pp. 547-561.
  2. Moisidis, N., "Evaluation of Local and Global Torus Shell Pressure Multipliers for Mark I Containment Based on Monticello Tests", Prepared for General Electric Company, 1979.
  3. Moisidis, N., "Verification of the Computer Code RVRIZ 02 for Reflood Transients in BWR Mark I and II Containments", Prepared for General Electric Company, 1979.
  4. Moisidis, N. and I. Harris, "Mark I Containment Pressure and Temperature Response to Small Break Accident", Prepared for General Electric Company, 1979.
  5. Moisidis, N., "Safety-Relief Valve System Analytical Models for Use With Ramshead Discharge Devices", Prepared for General Electric Company, NEDE-23801-P, July 1980.
  6. Moisidis, N. and N. Ozboya, "Safety Relief Valve Discharge Lines Thermal Hydraulic Load Definition", Kaiser Engineers - Cooper Nuclear Station, Prepared for Kaiser Engineers, 1980.
  7. Moisidis, N., A. Gokhman, and I. Harris, "Computation of Velocity and Acceleration Fields Due to LOCA-Induced Condensation/Oscillation with a Mark I Suppression Pool", Prepared for General Electric Company, 1980.
  8. Moisidis, N., A. Gokhman, and I. Harris, "Computation of the Added-Mass Interference Coefficients for two cylinders Immersed in an Uniformly Accelerating Field", Prepared for General Electric Company, 1980.
  9. Moisidis, N, N. Ozboya, and I. Harris, "Computer Program-LOCAJET- for the evaluation of LOCA-Induced Hydrodynamic Loads on Structures within BWR-Mark I Torus", Prepared for General Electric Company, 1980.
  10. Moisidis, N., N. Ozboya, and A. Gockhman, "Computer Program-POOLMIX-for the Evaluation of the Velocity Within BWR-Mark I Torus during Residual Heat Removal System Operating in the Suppression Pool Cooling Mode", Prepared for General Electric Company, 1980.
  11. Moisidis, N. and N. Ozboya, "Thermal-Hydraulic Load Definition for Vent System, Torus Shell and Structures Within the Torus, Cooper Nuclear Station", Prepared for Kaiser Engineers, 1981.
  12. Moisidis, N., "Pre-CHF Heat Transfer Coefficient and Friction Factor Empirical Correlations for Water Flowing in a Vertical Tube", Prepared for Electric Power Research Institute (EPRI), Palo Alto, California, February 1984.
  13. Moisidis, N. and L. Huston, "Preliminary Findings, Corrective Actions and Generic Implications Report for the Main Steam Header Pressure Excursions" Following the June 9, 1985 Trip at Davis-Besse Nuclear Power Plant, September 1985.
  14. Moisidis, N., "Main Steam Header Fluid Transient Analysis and MSSV Performance Data" for Davis-Besse Unit 1, March 1986.
  15. Moisidis, N.,, "Evaluation of the Minimum Water Height to Prevent Undesirable Vortex Formation at the Auxilliary Feedwater System Suction from the Condensate Storage Tank", Presented at Arizona Public Service, December 1989.
  16. Moisidis, N. and M. Popescu, "Radiation Protection Analysis and Design Options for a Shielding System to Encase the Letdown Delay Coils In the Reactant Coolant Pump Bay", Presentation at Arizona Public Service, May 1990.
  17. Ratiu, M., N. Moisidis and M. Popescu, "Methodology for the Evaluation of Break-Away Torque on Foundation Bolts/Nuts of Large Pumps", Presentation at Arizona Public Service, June 1990.
  18. Moisidis, N. and M. Ratiu, "Fire Protection Water System Corrosion Damage Assessment for Palo Verde Nuclear Generating Station", Presented at Arizona Public Service, July 1990.
  19. Moisidis, N., M. Popescu and M. Ratiu, "Boric Acid Corrosion Protection Program For Pump and Valve Fasteners", 7th International Conference On Pressure Vessel Technology, Dusseldorf,Germany, 1992, Conference Proceedings, Vol. II, pp. 991-1003.
  20. Moisidis, N. and M. Ratiu, "Pressurizer Safety Valve Seating Design Compatibility", 7th International Conference on Pressure Vesel Technology, Dusseldorf, Germany, 1992, Conference Proceedings, Vol. I, pp. 183-197.
  21. Moisidis, N., M. Popescu and M. Ratiu, "Protect Nuclear Plant Fasteners from Boric Acid Corrosion, Power Engineering", Vol. 96, No. 3, March 1992, pp. 38-41.
  22. Ratiu, M. and N. Moisidis, "Serviceability of Carbon Steel Piping to Intermittent Elevated Temperatures, The 1993 ASME Pressure Vessels & Piping Conference, Pressure Vessel and Piping in Industry", PVP Vol. 285, Denver, Colorado, July 1993.
  23. Ratiu, M. and N. Moisidis, "Qualification of Diesel Engine Exhaust Carbon Steel Piping to Intermittent Elevated Temperatures", Universitatea Tehnica Timisoara, Asociatia Romana ARTENS, Simpozium Juibiliar 70 de ani (1923-1993) cu Participare Internationala, pp. 276-295, Timisoara, Romania, October, 1993.
  24. Moisidis, N. and M. Ratiu, "Enhancement of Pressurizer Safety Valve Operability by Seating Design Improvement", The 1994 International Joint Power Generation Conference & Exposition, NE Vol 14, pp. 81-85, Phoenix, Arizona, October 1994.
  25. Ratiu, M. and N. Moisidis, "Seismic Qualification Procedure For Cold Formed Steel Structures".  The 1994 ASME Pressure Vessels and Piping Division Conference, Pressure Vessel and Piping in Industry, PVP Vol. 302, Minneapolis, Minnesota, June 1994.
  26. Ratiu, M. and N. Moisidis, "Oligocyclic Design Life For Steel Frames", Prepared for the 2003 International Conference for Strength of Materials, Timisoara, Romania.
  27. Ratiu, M. and N. Moisidis, "Seismic Load Rating Procedure for Welded Steel Frames - Oligocyclic Fatigue", Prepared for the 2003 International Institute of Welding Conference, Bucharest, Romania.
  28. Ratiu, M. and N. Moisidis, "Pressurizer Safety Valve Serviceability Enhancement by Spring Compression Stability", Proceedings of ICAPP 2007, Nice, France, May 13-18, 2007, Paper 7067.
  29. Moisidis, N., "The Role of Engineering in Biotechnology and Pharmaceutical Industries", The Romanian-German Oncology Symposium Sponsored by LAPHARM Pharmaceutische Produkte, held in Bucharest, Romania, May 2008